Top-Selling Veterinary Animal Use Surgical Table

• Type: Vet Operating Bed
• Syringe: Vet Operating Bed
• Blood Sampling Needle: No
• Breathing Pattern: No
• Animal Anesthesia Machine Control Method: Animal Anesthesia Is Optional
• Table Height: 820mm to 930mm
• Model NO.: DWV-IIDD
• Table Size: 1500mm × 800mm
• Table Gradient: ±15°
• The V-Top: 0 to 45°
• Tilting Mechanism Works: When Circumgyrating The Handwheel.
• Transport Package: Cartons with Foams Inside and Wooden Case
• Specification: CE&ISO Approved
• Trademark: SEEUCO
• Origin: Nanjing, Jiangsu, China
• HS Code: 90000000
• Production Capacity: 1000 PCS/Month

Product Description

Veterinary Operating Table
Model: DWX-MF



Detailed Product Description
A. Electric table: DWV-IIDD
B. Top made with Stainless Steel Material helps to prevent from corrosion, rust and
high temperature with drain.
C. Heated table helps to prevent from Hypothermia during small animal surgeries.
Controlled heating in temperature ranges from indoor temperature Celsius to
50 degrees Celsius.
D. 15 degrees at right-and-left side with machine control and 45 degrees at front-and-back side inclined with manual operation.
E. A3 armor plate base, chain wheel can move conveniently.
F. Overall size of the top: 1400 x 650mm
G. Table Height (Up/Down): 760-1060mm
H. Optional: Detachable filter which is good for ventilation.



IV. Installation and Use
1)  Put the table-board on top of the table base, plug into the pin, then it can be put into use.
2)  When using the tray, the screw should be screwed down.
3)  When adjusting the height, stepping on the pedal gently, then the table-board goes up; stepping on the pedal to the lowest and pressing the table-board gently, then it comes down.
4)  The tilting mechanism works when circumgyrating the handwheel.
5)  The 4 supporting screws should be locked to the ground when assembling the table. The casters will make it flexible when the screws are unlocked.
6)  During the operation, the slide bar should be adjusted to the right place and fixed first, and the animal would be fastened then. If the pothook is needed, it can be inserted into the side pipe and fixed.
7)  Please stop stepping firmly, if the resistance is too strong during the ups and downs.
8)  Please read the manual introduction before operation.
9)  Please clean the table-board after using.

V. Maintenance and overhaul
1) The maintenance free of charge lasts for one year.
2) The table you bought can be exchanged for any quality problems. The spoiling caused by improper use is not in the tradition.
3) The copper bars in the hydraulic-lift pedal need lube every half a month.
4) Please handle with care during the procedures of assembly, disassembly and delivery.


 

MOQ	1 SET
WARRANTY	12 MONTHS

You can also add Serena's or email to make contacts more
conveniently and easier!