BI-3000 Infant Incubator:
Servo Control Mode: Air temperature, skin temperature;
Instant Parameter Displaying: Set temp, air temp, skin temp, internal humidity, heat power rate;

Audible & Visual Alarms: Power failure, sensor failure, higher & lower temp, air& skin temp override, fan failure, system failure;

>37C Preset Mode: Power failure reset memory, alarm silence, keypad lock, self-test function;

Hood with dual slope: 6 hand-ports; Left & right cabinets, top-shelf;
RS-232 Output Connector (Use for network system ).

Specification
Specifications of hood BI-3000
Mattress to Hood 450 mm
Observation side of hood Two incline
Operate port 6 (2 Iris ports)
Tubing grommets 4
Front access panel 826× 310 mm
Mattress Tray Size 630× 360 mm
Technical Specification
Power requirement ≤ 400VA
Temperature control mode Air and skin servo control
AirTemp Control Range 20C~37C
Temperature override mode to 20C~39C
SkinTemp Control Range 30C~37C
Temperature override mode to 30C~38C
Skin temp sensor accuracy ≤ 0.3C
Humidity display range 5%~99%
Temperature fluctuation ≤ 0.5C
Mattress temperature uniformity ≤ 0.8C
Temperature rise time ≤ 30 min
Noise level within hood environment ≤ 55dB
Alarm
Power failure alarm Yes
Fan failure alarm Yes
Sensor failure alarm Yes
High air temperature alarm 1.5
Low air temperature alarm -2.5
High skin temperature alarm 1
Low skin temperature alarm -1
Over air temperature alarm ≤ 38.0C; ≤ 40.0C
Over skin temperature alarm ≤ 38.0C; ≤ 39.0C
System failure alarm Yes
Alarm silence function Yes
Operational condition
Environment temperature 20 C~30 C
Environment relative humidity 5%~99%
Environment air velocity of flow <0.3m/s
Others
RS-232Connector Yes
Rail Yes
Infant bed tilt adjusting ± 10° Step-less
Mattress tray Max. Load 10kg
Transfusion pole Max. Load 2kg
Cabinet Max. Load 6kg
Packing size (2 cartons) 100× 58× 80 cm
Gross Weight 120kg